FJ Cruiser MAX Driver's side plain (NO LOGO)

Our FJ cruiser MAX is the very best way to have both sides of storage in your FJ Cruiser. This unit will hold a lot of material in both Hanging on the outside and on the inside. Standing at 11.8inches tall and at the top opening 23.4 inches widening out to 27 inches. 6.875 of an inch away from the wall of your FJ wheel well area.

This unit bolts in at the top using the grocery hooks bolt hole. Drill into the plastic at the bottom to install 4 bolts. This becomes a very solid storage unit. Made from 11ga USA carbon steel.

Option of industrial Velcro can be used at the bottom where you would drill into the plastic to secure the bottom. Velcro option is not as secure as the bolt in option.

Our own design of ovals and holes. The ovals will hold USA Military style Molle bags. Our holes are at every 2.00 inches side to side and 1.00 inches top to bottom. These holes are made to except a 5/16 bolt or a M6 rivnuts.

This gives you the user endless possibilities to store your equipment.

• Drivers side only
• Plain NO LOGO
• The Max comes with a End plate to keep all parts inside storage area when seat is folded down. This part will always be in matte black.
• Store your Critical gear both inside and outside of Max area.
• Get your Gear off the floor
• powder coating Matte Black
• You will have to drill into the interior panel or use a Velcro kit to install this item. Or choose option to install with Velcro straps. Velcro is a industrial grade.
• All brackets are in black.

Instructions for install

Instructions LINK will work only after a paid order for 2 years. If you have any issues please contact customer service,

Customizing Your PSD. We will contact you after you have made your order. We will ask you from there what you want on your PSD. We will stay in contact with you till you give us approval. It take 6 to 8 weeks to finish your custom PSD.

*** Attention ***

Picture may not 100% match of the product you receive.

When ordering Custom parts (LLCO,LLEM or Colors) This increases production times. If it is just a color it goes from 1-2 weeks to 3 weeks. Special cuts (LLCO) or inlays (LLEM) this will increase it to 6 to 8 weeks.

Company phone number (336) 804-0571 M-F 9am-5pm Eastern

Email us at sales@orangeboxxfab.com

Picture may not 100% match of the product you receive.